What you need to know about large scale cultivation (Issue 2)—BioFactory Manual-무석내사생명과학기술주식유한회사

The most recent issue introduces the NEST BioFactory ^TM, a cleverly designed vessel that facilitates the growth of adherent cells for large-scale production in industries such as vaccines, monoclonal antibodies, and biopharmaceuticals. The BioFactory ^TM maximizes culture area while minimizing factory footprint, resulting in a significant boost in cost-effective production capacity without altering the kinetic conditions of cell growth. And this issue explores the role of BioFactory ^TM in various industries, its usage stages, and how to operate it for maximum value.

Application

01 Cell and Gene Therapy

Cell and gene therapy refers to vector therapy, an emerging therapeutic modality that introduces exogenous genetic material into target cells, modifies or manipulates the expression of genes and alters the biological properties of cells to achieve therapeutic effects. A significant obstacle that it encounters currently is the secure and efficient transportation of the desired gene or cell into the human body. Generally, viruses, such as adenoviruses, adeno-associated viruses and lentiviruses, are used as vectors.

Small-scale production for research and development purposes uses adherent cells cultured in dishes, flasks and BioFactories^TM. However, when it comes to clinical trials, where a large number of lentiviral vectors are required, BioFactory ^TM comes into play, particularly the 10-layer BioFactory ^TM.

02 Vaccine industry

Vaccines play an irreplaceable role in the prevention and control of human diseases, and there is a constant focus on achieving safe, efficient, and cost-effective mass production of vaccines. With advancements in biotechnology, new types of vaccines such as viral vector vaccines, DNA vaccines and mRNA vaccines have emerged one after another, in addition to the common types of vaccines such as inactivated vaccines, live attenuated vaccines and recombinant protein vaccines .

Under such circumstances, BioFactory ^TM is widely utilized in the industrial production of various vaccines including coronavirus vaccine, inactivated oral polio vaccine, lyophilised live attenuated hepatitis A vaccine, MMR vaccine, live oral rotavirus vaccine, and varicella vaccine.

03 Stem cell research

Stem cell is a kind of cell that have an infinite capacity for self-renewal and are capable of producing at least one type of highly differentiated daughter cell. According to clinicaltrials.gov, a resource provided by the U.S. National Library of Medicine, there are currently more than 1,300 clinical trials related to MSCs worldwide and 14 new stem cell drugs have been granted marketing authorization. And the scaling up of MSCs and multifunctional stem cells in BioFactories ^TM functions as an important step in stem cell researches.

BioFactory ^TM Manual

01 Suggested operating method for BioFactory ^TM

For 10-layer BioFactory ^TM

1. Pour the prepared medium into the BioFactory ^TM. ( 150-200ml per layer) .

2. Position the BioFactory ^TM on its side to level the liquid surface.

3. With the mouth facing upwards, allow the culture medium to stand for even distribution across all layers.

4. Slowly lower the BioFactory ^TM to a horizontal position.

5. Place in the cell culture incubator for incubation.

For 10-Layer BioFactory ^TM with Tubes

1. Cut off the rolled strip on the tubings.

2. If necessary, add a clamp to the inlet tubing, then connect the end of the inlet tubing to the outlet tubing of the storage bottle through a sterile connecting device .

3. Add cell suspension, and close the clamp on the inlet tubing. The culture medium or cell suspension in side can be transferred into BioFactory ^TM by siphon or a peristaltic pump. Please avoid generating bubbles during the operation.

4. Position the BioFactory ^TM on its side to distribute the liquid evenly on each layer. The inlet tubing should face downwards, and the filter should face upwards to prevent liquid from entering the filter.

5. Rotate the BioFactory ^TM 90 degrees clockwise to make the mouth face upwards. Allow it to stand for even solution distribution across all layers.

6. Slowly place the BioFactory ^TM in a horizontal position, put the inlet tubing straight, and then place it in the incubator for incubation.

Notes:

1. Due to the long period took by large incubators to reach the set temperature, please pre-heat BioFactory ^TM and culture medium in advance to accelerate cell spreading and significantly improve cell recovery rate.

2. Operate slowly to avoid generating bubbles, which may cause the culture medium to flow from the upper layer to the lower layer.

3. Avoid alcohol on the vent cap, which may wet the hydrophobic filter membrane and obstruct gas exchange or cause pressure imbalance during operation.

02 Suggested method for cell observation :

Generally, an inverted microscope is used to monitor the survival rate and growth status of cells in BioFactory^TM. Since the culture environment between layers or within the same layer is basically the same, the overall status of cells can be learned through the observation of edge cells in the layers at the bottom or in one specific layer .

Restricted by the distance between upper light and the carrier stage , a regular inverted microscope is applied in the observation of 1/2/5-layer BioFactory ^TM. But for the observation of a 10-layer BioFactory ^TM, the distance should be extended to accommodate the BioFactory ^TM. As for a 40-layer BioFactory ^TM with even more layers, large automated equipment is usually required since manual operation in this case is way too difficult .

03 Suggested method for c ell h arvesting :

1. Pour out the medium after culture .

2. Rinse with calcium- and magnesium-free phosphate-buffered saline (CMF-PBS) (40-50 mL per layer), and repeat it if necessary.

3. Digestion : preheat the digestion solution (10-40 ml recommended for per layer)

4. Collection: Centrifuge the solution at 1000 rpm for 5 minutes, remove the digestion solution and collect the cells.

5. Rinse the culture vessel with CMF-PBS or culture medium.

Notes:

1. Immerse the surface of each layer with CMF-PBS completely, and gently shake the BioFactory ^TM back and forth to wash away the remaining culture medium.

2. Distribute the digestion solution evenly to each layer, gently tilt the culture vessel from side to side to immerse the surface of each layer with digestion solution completely, and gently tap the wall to detach the cells from the surface.

3. For the observation of digestion status in BioFactory ^TM, it is recommended to refer to that in cell culture flask s or 1-layer BioFactory ^TM under an identical culture condition, since the digestion status of cells in the middle layers cannot be observed clearly. A dedicated multi-layer microscope can be used to observe the digestion status of each layer of cells.

4. If there are a large number of cells in the washing solution or on the surface , multiple rinse-off or digestion may be required.

5. Even a slight deviation in the culture temperature may affect the cell harvesting rate, so it is necessary to control the temperature at the set temperature.

반환목록

이전：NEST Tube is adopted by WHO, Uganda to test Ebola Vaccines in outbreak 2022-11-24

다음：What you need to know about large scale cultivation (Issue 3) —BioFactory Closed System Solution 2023-04-03